| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Blaupunkt | FM100 | Dead - relay click as normal | No mains feed to pcb as relay M865 o/c pole | 14-09-04 |
| Blaupunkt | FM100-21S | field - lack of | C723, C733 1000µ 25v | 14-09-04 |
| Blaupunkt | FM100-30 | Entering service mode | Power up set with "ME" pressed V-Amp press brightness then adjust with plus and minus,store with ME
V-Shift press >< ......
H-Width press colour ......
H-Shift press volume ......
Power off with mains switch.
Power on the set with ME depressed until display is lit.
Audio-norm press P
Power off with mains switch.
Power on the set with ME depressed until display is lit.
Standby-enable press oo (two channel mode)
Power off with mains switch.
two digit program-numbers,select between1-9,press C and select
channel,press ME and select within 5 seconds two digit number,
the numbers in your choosen decade are now enabled and accessable.
| 14-09-04 |
| Blaupunkt | IM63-18FM 100-41 | E-W bowing - won't correct | IC555 TDA 8145 | 14-09-04 |
| Blaupunkt | IM63-18FM 100-41 | Width excessive | D518 BY 399 s/c
| 14-09-04 |
| Blaupunkt | MS70-76 FM 100-30 | black screen | U2(200V) is missing at CRT pcb. Check fuse S720 and R1853(3K3)+V1855 (BF421) on video module. +evt. R1816+V1815 | 14-09-04 |
| Blaupunkt | MS70-76 FM 100-30 | No start up at power on | C450 100uF/25Vin psu between TDA 4601 & base V450. Also check L452 in Coll of V450 & all comps in psu. Recomend fit 10k between pin 1 & 9 of TDA 4601 | 14-09-04 |
| Blaupunkt | MS70-76 FM 100-30 | Relay clicks at sw on - otherwise dead | C441 1uF & R440 330k in psu area; 11v at V410 front left in front of modules ( measures 8 volt in Stby ) | 14-09-04 |
| Blaupunkt | MS70-76 FM 100-30 | Reverts to st/by at sw on | C450 (100uF/25V) in psu area | 14-09-04 |