| Make | Model | Problem | Solution | Date |
| | | |
| Found: 8
|
| Loewe | M124 | Bottom foldover | C581 47µ 25v | 14-09-04 |
| Loewe | M124 | Int weak contrast | dry joints front controls & pcb | 14-09-04 |
| Loewe | M124 | Lack of height | dry joints field o/p chip & height pot | 14-09-04 |
| Loewe | M124 | No cold start | C624 100µ, C638 1µ | 14-09-04 |
| Loewe | M124 | Small, flat pic with non-lin field | C652, 653 47µ 250v | 14-09-04 |
| Lowe | M124 C8500 | Dead with 1.6A fuse blown | TDA4601 chopper chip s/c, small blue therm in start up cct, T539 BU508D LOPTr hi res | 14-09-04 |
| Lowe | M124 C8500 | High HT (should be 142v) | C652 47µ 250v ; C653 47µ | 14-09-04 |
| Lowe | M124 C8500 | Pic jitter & /or hum on pic with chan display flickering, sound goes low & controls not working int | Check for dry joints in psu, front pcb & IR receiver | 14-09-04 |