| Make | Model | Problem | Solution | Date |
| | | |
| Found: 7
|
| Philips | MD1.2E AA | E/W fault & lack of width | E-W driver FET 7480 dry jointed tho looked ok | 14-09-04 |
| Philips | MD1.2E AA | No pic sound ok with burning smell | HT & A1 supply only 2/3 normal - dry joints scan coils plug | 14-09-04 |
| Philips | MD1.2E AA | St/by only - tries to start up | Resistor R3555 160K on the secondary side of the power supply ( voltage set circuit ) has gone high to 220K | 14-09-04 |
| Philips | MD1.2E AA | Various int inc max vol, chans cont change on their own, no sound control, int sw itself on | Check small top mounted pcb for damage when back is fitted | 14-09-04 |
| Philips | MD1.2E AA 28PW63332/05 | Line collapse | Burnt conns on deflection yoke plug/skt | 14-09-04 |
| Philips | MD1.2E AA 29PW6332/05 | Excess width with poor E/W | Dry joints E/W driver Trfmr 5424 | 14-09-04 |
| Philips | MD1.2EAA 29PT6773/05 | Won't go into st/by | R3588 3R3 ?w o/c in st/by prot cct on large sigs panel - also replace C2561 with 3,300µ 16v | 14-09-04 |