| Make | Model | Problem | Solution | Date |
| | | |
| Found: 6
|
| Ferguson | RP46 | Dead - st/bt led comes on briefly & buzzing from chopper tfmr | Overload on lop caused by EHT splitter shorted | 14-09-04 |
| Ferguson | RP46 (Proj TV) | No Red | R615 [910K] open circuit - in series with the red A1 preset | 14-09-04 |
| Ferguson | RP46 (proj) | Red pic at sw on then shuts down | RG18 680k on sub G2 board o/c | 14-09-04 |
| Ferguson | RP46 (proj) | Vol level varies on its own | CR11 o/c - near IR01 | 14-09-04 |
| Ferguson | RP46 rear proj | No convergence | RP09 100k or RP18 220k o/c in conv psu near blue tube | 14-09-04 |
| Thomson | RP46 | Tripping - EHT splitter faulty, new one has short life | R18 220k hi res & check R9 100k 2w | 14-09-04 |