| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Ferguson | T59N | Int reverts to st/by, no E-W & excess height with white line across screen 3" from top | Broken data line by tuner & height problems cured by replacement of micro | 14-09-04 |
| Ferguson | T59NB | Dead | RL08 10k o/c, LOPTx faulty & EEPROM corrupted | 14-09-04 |
| Ferguson | T59NB | Dead - LED dims & flashes when brought out of st/by | LOPTx & RL08 {10k}, RL07 {3K9} sm near LOPTx | 14-09-04 |
| Ferguson | TX92 T59N | Tuner int symptom | Can be caused by sm trs in IF unit - blanket resolder | 14-09-04 |
| Ferguson | TX92 T59NB | Dead - LED flashing - HT (130v) down to 60v | LOPTx | 14-09-04 |
| Ferguson | TX92 T59NB | Flashing LED - rasping noise when comes out of st/by only | LOPTx - make sure you quote exact pt no off orig | 14-09-04 |
| Ferguson | TX92F T59NB | Dead sm resistors burnt up under LOPTx | RL07 3k9 & RLo8 10k sm under Loptx & replace LOPTx that caused the fault | 14-09-04 |
| Ferguson | TX92F T59NB | Field foldover at top | CF30 47µ 50v between pins 3 & 6 of FOP chip IF01 | 14-09-04 |
| Ferguson | TX92F T59NB | St/by only with flashing led | LOPTx & RL08 10k sm under loptX | 14-09-04 |