| Make | Model | Problem | Solution | Date |
| | | |
| Found: 12
|
| Alba/Bush | CTV100 | Uncontollable vol that wont reduce | L101 o/c | 14-09-04 |
| Amstrad | CTV1000 | Blank white raster , sound control o/c | Q7601 ( 25C1675 ) , C7901 ( 240pf ) S/C tune/f | 14-09-04 |
| Amstrad | CTV1000 | Line collapse | Dry joints line lin coil L7702 | 14-09-04 |
| Amstrad | CTV1000 | Line hold drifts int. | Dry on line hold control | 14-09-04 |
| Amstrad | CTV1000 | Raster - blank - sound Ok. | Q7601 ( 2SC1675 ) C7901 ( 240PF ) S/C | 14-09-04 |
| Bush | CTV100 | Int dead | check for slack fuse holders | 14-09-04 |
| Casio | TV100 | Dead - Fuse FU100 (1A) o/c | LCD backlight inverter trs Q901/2 s/c; caused by s/c turns in pri winding of inverter tfmr - can be rewound with care | 14-09-04 |
| Hinari | VTV100 | dead apart from st/by relay click | relay contacts burnt | 14-09-04 |
| Hinari | VTV100 | dead tv sect - vcr sect ok | HT at lop tr & driver. No line osc from IC301 pin32 - replacing chip TA7698AP gave osc o/p from chip but still no go.Lop tr faulty. | 14-09-04 |
| Hinari | VTV100 | Excess brightness | Q301 2SA1015 s/c - can use BC307 in lieu | 14-09-04 |
|
|
| Hinari | VTV100 | Line foldover then blew lop tr | dry joints lop sect esp around heatsink | 14-09-04 |
| Hinari | VTV100 Combi | Raster - high raster. | Q301 ( 2SA1015 or BC307 ) s/c. | 14-09-04 |