| Make | Model | Problem | Solution | Date |
| | | |
| Found: 6
|
| Panasonic | TX21S1T | Brightness increases over time causing trip | LOPTx had faulty A1 sect | 14-09-04 |
| Panasonic | TX21S1T/BH | To tune press "F" button on front of set | Until "tuning" shows - then pres "^" key. You can enter Chan no. by prefixing with "C". Then select pos with chan up/down keys & press "S" to store. Exit by pressing "F" key | 14-09-04 |
| Panasonic | Z5 TX21S1T | dead with tripping noise | NO LINE DRIVE, 8V SUPPLY TO IC601 IS LOW BECAUSE R821 330K O/C | 14-09-04 |
| Panasonic | Z5 TX21S1T | frame collapse | R521 8.2R 2W GONE HIGH OR O/C (LOPTX PIN 8) PART NO. ERQ2GJP8R2 | 14-09-04 |
| Panasonic | Z5 TX21S1T | Pic shifted to right with line foldover & col instability | TDA8361N4 | 14-09-04 |
| Panasonic | Z5 TX21S1T/R | Tripping - runs ok if loaded with a 60w lamp | Q803 2SD1272QLB leaky | 14-09-04 |