| Make | Model | Problem | Solution | Date |
| | | |
| Found: 11
|
| Panasonic | Euro 2 TX25AD2 | Field collapse | VDP IC pt no TZS9EK002 comes with new EPROM approx ?30 | 14-09-04 |
| Panasonic | Euro 2 TX25AD2 | Lack of width with E/W corr faulty | C593 0.01mfd ceramic cap | 14-09-04 |
| Panasonic | EURO2S TX25AD2DP | dead, no startup | 5V SUPPLY TO IC1801LOW BECAUSE IC1601 AN78L05TA FAULTY (5V REGULATOR) | 14-09-04 |
| Panasonic | EURO2S TX25AD2DP | no sound, no pic, led pulsing dim-bright | relay RL6101 (TSE10818) faulty, replacement from Goodmans 1430 works OK | 14-09-04 |
| Panasonic | EURO2S TX25AD2DP | trips to stby every 2-3 secs, frame collapse | I601 VDP3108APPA1 | 14-09-04 |
| Panasonic | EURO2S TX25AD2DP | won't go to stby | Q667 BC547B o/c | 14-09-04 |
| Panasonic | TX25AD2DP | DEAD NO STANDBY LIGHT | TRY REPLACING IC1801 | 14-09-04 |
| Panasonic | TX25AD2DP | DEAD WITH RED LED PULSING | RL6101 COULD BE BURNT UP | 14-09-04 |
| Panasonic | TX25AD2DP | Field collapse | Caused by faulty proc chip | 14-09-04 |
| Panasonic | TX25AD2DP | WONT GO INTO STANDBY | REPLACE Q667 BC547B | 14-09-04 |
|
|
| Panasonic | TX25AD2DP Euro 2 | Line jitter - int | Fit mod kit TXS9EK002-2; but do not replace EEPROM on this model or sound will be lost (Pro Logic version) | 14-09-04 |