| Make | Model | Problem | Solution | Date |
| | | |
| Found: 6
|
| Panasonic | Euro 2 TX29AD1DP | Bright red raster which went to field collapse then tripped off | Dis pins 5 & 6 of EEPROM I941 & re-try. If pic returns, albeit short, then EEPROM faulty. Reqs reprog or a pre prog one fitting (X24C0706AH - Pan- cheapest, or SEME). Also replace relay TSE10818 - cause of initial trouble & remove R668 | 14-09-04 |
| Panasonic | Euro 2 TX29AD1DP | Dead with psu tripping | C622 47µ 50v, C634 1µ 50v | 14-09-04 |
|
|
| Panasonic | EURO2S TX29AD1DP | excessive width with E/W error | Q593 BC547B | 14-09-04 |
| Panasonic | TX21MD1, TX21AD2, TX25MD1,
TX28LD1, TX25AD1, TX25AD1DP,
TX29AD1, TX29AD1DP | Black & white vert lines - replace VDP3108 | Orig IC601 nla - use kit TZS9EK002-2, which includes EEPROM with nec software changes to use VDP3108APPA1 | 14-09-04 |
| Panasonic | TX29AD1DP | Dead wioth fuse blown | Check positor for rattle - 96706 (expensive) | 14-09-04 |
| Panasonic | TX29AD1DP | int field - thin black lines at bottom | D507 & D508 MA723TA5 | 14-09-04 |