| Make | Model | Problem | Solution | Date |
| | | |
| Found: 13
|
| Ferguson | TX99 | Controls - up/down not working correctly. | Ok with h/unit - S/c across D2/D3 to IC241. | 14-09-04 |
| Ferguson | TX99 | Dead | Check R239 ( 100ohm ) if o/c replace IC241 ( M494B ) | 14-09-04 |
| Ferguson | TX99 | Dead - psu appears to be working | No 18.5v supply, check ICP1 1A cct prot & dry joints leadout wires on chopper tfmr | 14-09-04 |
| Ferguson | TX99 | HT LOW AFTER POWER SUPPLY REPAIRED | C103 47u 160v | 14-09-04 |
| Ferguson | TX99 | INT COLOUR | XL1 4.433Mhz XTAL , R60 100R , C63 22pF | 14-09-04 |
| Ferguson | TX99 | Int dead | Dry joints LOPTx | 14-09-04 |
| Ferguson | TX99 | Int excess height, flyback lines & twitching pic | Dry joints IC5 12v reg | 14-09-04 |
| Ferguson | TX99 | LOSES SOUND WHEN HOT | RED LED D5 BEHIND TUNER | 14-09-04 |
| Ferguson | TX99 | NO GO POWER SUPPLY O.K. | L21 O/C | 14-09-04 |
| Ferguson | TX99 | No pic or sound - chan no's ok | Vid o/p from IF ok but no analoge control - no PWM o/p from M494B1 micro - chip u/s | 14-09-04 |
|
|
| Ferguson | TX99 | no txt after removal of main pcb | 9v missing due to connector PL22 not connected (left of lopt) | 14-09-04 |
| Ferguson | TX99 | Snowy raster stuck on chan 1 with no R/C except txt | No I/p to pins 19 & 20 IC241 memory chip M494F as IC243 33v reg uPC547 u/s | 14-09-04 |
| Ferguson | TX99 | Spots/flashing int on screen | L21 cracked iron former | 14-09-04 |