Make | Model | Problem | Solution | Date |
| | | |
Found: 15
|
JVC | AU21F1 | Int signals | Dry joint IC522 5v reg mounted on central heatsink | 14-09-04 |
Panasonic | U2 | Field collapse | Q403 (Darlington tr) 2SD837 - BD645 works | 14-09-04 |
Panasonic | U2 | Frame - top foldover if adj A1 control. | Frame IC TDA1106. | 14-09-04 |
Panasonic | U2 | Lines/interference on pic | C854 o/c | 14-09-04 |
Panasonic | U2 | No brightness. | BU208. | 14-09-04 |
Panasonic | U2 | No picture - CRT cut off. | 2x zeners 6.2v in regulator base cct. | 14-09-04 |
Panasonic | U2 | Sound - level affected by contrast control. | C857 ( 47u f ) | 14-09-04 |
Panasonic | U2 | Sqealing/line tearing/corrugated verts | C809 1µ 250v | 14-09-04 |
Panasonic | U2 | Standby - stuck in standby. | PSU D852/3 , Q501 line drive transistor , LOPTX. | 14-09-04 |
Panasonic | U2 | Standby - stuck in standby. | D552 ( TVSC2715M ) o/c. | 14-09-04 |
|
Panasonic | U2 | Stuck in standby. | D852 or D853 ( BY298 ) leaky , BU208. | 14-09-04 |
Panasonic | U2 | Width & Hight reduced. | C371 ( 100uf 240v ) in middle of board. | 14-09-04 |
Tatung | TU2C52G | Hotel mode removal (low sound) | press -/-- on the remote, vol up on tv, then -/-- on remote again. | 14-09-04 |
Tatung | VU2CEO C chassis | Noise from chopper trfmr in standby | CE803 220µ 25v in PSU pri | 14-09-04 |
Tatung | VU2CEO C chassis | Txt lines at top of pic | CE306 100u 50v | 14-09-04 |