| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Akai | CT2862UNT | Dead - PSU components burnt | STRS6309, C925 150uF 200V blown, R920 39k, R904 47R, R914 47R, R915 82k, R916 120R all burnt, Q902 2SA1015 s/c -also replace IC902 TLP721 & IC903 SE140N to be safe sus caused by arcing on/off mains switch | 14-09-04 |
| Akai | CT2862UNT | Field collapse | D406 BA157 s/c, R422 0R68 o/c, TA8427K FOP chip IC401 & C401 100µ 35v o/c | 14-09-04 |
|
|
| Akai | CT2867UNT | Dead with chopper V025 & LOPTr VK50 s/c | check C025/026/027/028 in the psu primary, CK57 and RK56 & CK51 - VO25 (S2000N) and VK50 (BUF450) replaced - no other fault found! | 14-09-04 |
| Matsui | 20TN (Tatung D4N) | To enter service mode after EEPROM corrupted - no sound or OSD (just black blank window) | Fit link across 2 pins of PL701, ensure aerial is in, and power up from H/set; Press Chan down 3 times. You are now in text mix mode, Adjust using vol+, Press TV button to store. Press Red Fastext button, Adjust contrast using vol+, this will restore graphics. Press TV button to store. Switch off, remove link. | 14-09-04 |
| Saba | S Chassis withMTS2020SM Tuner | Int. snow with no picture.Seems to be DJs. | Replace 1nF SMD capacitor connected between pins 3 and 4 of SDA2101 | 14-09-04 |
| Schneider | 26" (It can also be found as Koerting model 26) | Starts but it is not possible to change programs or to search for channels. | Change Control chip SDA2030-A002 | 14-09-04 |
| Schneider | 26" (It can also be found as Koerting model 26) | Won't start, PS protection active. | Desolder Vertical IC, if it starts, change it. | 14-09-04 |
| Sony | VTX-100CS TV Tuner | No sound | Check/Replace R358 220Ohms Resistor | 14-09-04 |
| Tatung | TUNOA51 | Int start up | IC802 LM317 reg | 14-09-04 |