| Make | Model | Problem | Solution | Date |
| | | |
| Found: 12
|
| Alba | CTV14R | Field bounce | R317 10k 2W dry ( near line hold preset ) | 14-09-04 |
| Alba | CTV14R | If VOL up used shows row dots as if sound at min | Replace IC601 MN6030 | 14-09-04 |
| Alba | CTV14RS | Frame collapse - no sound. | D410 s/c , R425 ( 6.8R ) o/c. | 14-09-04 |
| Alba | CTV14RS | No sound & field coll | R425 6R8 o/c, D410 s/c (12v supply from lop) | 14-09-04 |
| Alba | CTV14RS | Various inc no tuning, sound, dead etc | Cracks in print on front panel | 14-09-04 |
| Alba | CTV14RS/55 | Shows row of dots when vol adj | IC601 MN6030 memory chip faulty | 14-09-04 |
| Beon | CTV14R | Snowy raster only | St/by trfmr o/c winding | 14-09-04 |
| Fidelity | CTV14R | Signals int & no chan 3 | ML923 tuning chip & tuner | 14-09-04 |
| Goodmans | 2170 2175 2180 2185 2595 TV14RC | LOPTr Q210 has short life - High EHT & Focus volts | C264 47µ 160v (C434 in TV14RC) | 14-09-04 |
| Tatung | F Series V14RFG1G | Blank raster at switch on OSG ok .Then goes to trip mode. Leds flash 4 times in a cycle | Replace R909.R913.R922 all 180k on CRT base board. | 14-09-04 |
|
|
| Tatung | V14RFG1P | dead, PSU blown | fit PSU kit 9813136 | 14-09-04 |
| Tatung | V14RFG1P | starts up with sound but no pic and reverts to stby after 5 sec | R909 ,R913, R922 180k gone high | 14-09-04 |