Make | Model | Problem | Solution | Date |
| | | |
Found: 16
|
Alba | CTV12 | Dead - channel display ok | DJs on line driver transformer | 14-09-04 |
Alba | CTV12 | Dead - Int dead - power-on light on. | R304 going high. | 14-09-04 |
Alba | CTV12 | Dead - st/by only | LOPT DRY | 14-09-04 |
Alba | CTV12 | Dead apart from chan display | Dry joints line dr tfmr | 14-09-04 |
Alba | CTV12 | Dead. | T301 o/c , Diode P600A o/c. | 14-09-04 |
Alba | CTV12 | Dead. | Dry joints on line driver transformer. | 14-09-04 |
Alba | CTV12 | Dead. HT supply Ok. | Q208 Faulty. | 14-09-04 |
Alba | CTV12 | No sound or picture channel display lit. | Dry on Line driver or LOPTX | 14-09-04 |
Alba | CTV12 | No sound or picture. | Q208 12v reg o/c can use a TIP41. | 14-09-04 |
Alba | CTV12 | No sound or raster - HT & display Ok. | D/J T201 ( looks Ok ) , Q208 o/c. | 14-09-04 |
|
Alba | CTV12 | No sound/pic - HT normal | Q208 12v reg tr o/c - TIP 41 works ok | 14-09-04 |
Alba | CTV12 | When removing back cover. | Check for screw inside rear foot ( underside ) | 14-09-04 |
Amstrad | CTV12 | Weak/no sound | R151 39k near lh edge of pcb o/c | 14-09-04 |
ITT | CTV1204 CVC1204 | Dead. | Blows BU508 at switch on , check C701 for s/c. | 14-09-04 |
Pye | 37KV1212 | Crackle/popping on sound esp when tapped | Removing TDA7052, cleaning print & replacing cured fault | 14-09-04 |
Pye | 37KV1242/05B GR1AX | Buzzes , HT correct ( 95v ) . | L5524 OC. | 14-09-04 |