Make | Model | Problem | Solution | Date |
| | | |
Found: 15
|
Panasonic | Z4 Chassis | Bright green at sw on & int cuts out | C350 on crt base | 14-09-04 |
Panasonic | Z4 Chassis | Col int low or absent | C2651 0µ01 sm int o/c | 14-09-04 |
Panasonic | Z4 Chassis | Comes on with field collapse - gradually opens up then int shuts down | C462 470pF ceramic cap leaky in FOP cct | 14-09-04 |
Panasonic | Z4 Chassis | Dead - blank raster when optocoupler overidden | No activity from main micro - IC1202 EEPROM ST24C02A faulty | 14-09-04 |
Panasonic | Z4 Chassis | Dead - surge lim res R802 4R7 5W o/c | STR54041M IC801 & Q801/2 s/c & D854 overvolts prot diode s/c. C809 0µ1feedback cap was the cause (caused excessive HT) also change C808 10µ 63v | 14-09-04 |
Panasonic | Z4 Chassis | Dead after initial burst of life | Trips even with LOP stage dis'd - fault in prot cct - Q558 2SA879 faulty tho checked ok out of cct | 14-09-04 |
Panasonic | Z4 Chassis | Field int collapses or rolls | C402 3µ3 tant cap in Field osc stage | 14-09-04 |
Panasonic | Z4 Chassis | Int loss of sound | Check conns to speakers | 14-09-04 |
Panasonic | Z4 Chassis | Letter "C" displayed towards left/centre of screen | Reset micro by pressing VOL- button on TV whilst pressing Timer button on Hset - Oks then displayed | 14-09-04 |
Panasonic | Z4 Chassis | No sound and half a pic (shifted over) | C503 0µ01 cap across line shift control leaky | 14-09-04 |
|
Panasonic | Z4 Chassis | No sync | Comes from Txt board where IC3507 MAB8461-PW216 was faulty (dis pins 2 & 3 to check) | 14-09-04 |
Panasonic | Z4 Chassis | No video with faint unsync lines in background | Sync pulses leaving pin14 IC521 poor - 180pF cap connected to this pin leaky | 14-09-04 |
Panasonic | Z4 Chassis | Slight tuning drift, no sound, no Vol OSD (other OSD OK) | Insufficient sync drive to Q1272 base. C524 180pF connected to pin 14 IC521 leaky | 14-09-04 |
Panasonic | Z4 Chassis | The Panasonic Z4 Chassis | See TV Mag Sept - Nov 1994 | 14-09-04 |
Panasonic | Z4 Chassis | When chan stored in a prev stored location, all chans appear the same | Check for dry joints around link J10 on Txt pcb | 14-09-04 |