| Make | Model | Problem | Solution | Date |
| | | |
| Found: 8
|
| Fidelity | ZX5000 | Blank raster with lines at top & noises | C18 HT res cap 220µ 250v | 14-09-04 |
| Fidelity | ZX5000 | dead | BUT56A chopper tr s/c, C28 10n burnt leg, C5 4µ7 replaced, C18 100µ 250v o/c | 14-09-04 |
|
|
| Fidelity | ZX5000 | Dead - Chopper tr BUT11A s/c | Replace C5 4µ7 63v, C7 220µ 25v, IC1 UC3844N, IC13 CNY75B opto | 14-09-04 |
| Fidelity | ZX5000 | Dead BUT56A s/c. | R120 ( 3.3ohm ) o/c , R115 ( 0.68ohm ) , C5 ( 4.7uf ) , IC13 ( UC3844 ) | 14-09-04 |
| Fidelity | ZX5000 | Dead. | HT low at 30v , C18 ( 100uf 250v ) | 14-09-04 |
| Fidelity | ZX5000 | NO GREEN AND NO COLOUR UNLESS BRIGHTNESS TURNED UP | VCU2213 US | 14-09-04 |
| Fidelity | ZX5000 | No green unless on low brill & no col until brill control turned up & col out of register | VCU2213A video codec chip | 14-09-04 |
| Saisho | CM260TT ZX5000 | Dead | Tr1 BU145A chopper tr s/c, 1.6A fuse o/c, IC13 TIL111 opto coupler - IC1 UC3844 replaced as a precaution | 14-09-04 |