| Make | Model | Problem | Solution | Date |
| | | |
| Found: 8
|
| Ferguson | 21CB25UT etc | Parent Lock | holding the standby button down for 4 seconds & hide the remote from the kiddies. The set can be turned on again only with the handset. | 14-09-04 |
| Ferguson | 21CB25UT etc | To display the menu | press PR-(Program minus), stop & on/off buttons
on the set (Not the remote). Adjust using arrow buttons & then press Exit to quit menu. | 14-09-04 |
| Ferguson | FG20CB22U | Switches itself off aft 10 mins | Replace 4 elects in pri of psu | 14-09-04 |
| Thomson | 14CB25UT | Dead with psu running | Fuse FW002 on video board | 14-09-04 |
| Thomson | 20CB25UT | Int no response to any controls, int no sound or pic at start up | After checking EEPROM by replacement discovered micros clock not running - not Xtal but 2 x sm caps in xtal osc cct | 14-09-04 |
| Thomson | 20CB25UT | TV cuts out aft 10 secs - video sect dead | R002 1R o/c on video | 14-09-04 |
| Thomson | 21CB26VN | Dead - psu works on dummy load | RP531 100R sm o/c (had prev had FOP chip IF01 & chopper FET TP20 changed) | 14-09-04 |
| Thomson Ferguson | 14CB25UT C3615UT | No pic - sound ok but reverts to st/by aft 5-10secs | DL07-BY228 in e/w stage | 14-09-04 |