| Make | Model | Problem | Solution | Date |
| | | |
| Found: 6
|
| Daewoo | CP420 GB14F7T1 | Int reverts to st/by | RLY2 relay was operating when fault occurred - IC I807 (TOP210-PF1) the standby switch mode IC in the power supply | 14-09-04 |
| Daewoo | GB14F7T1 | Dead - psu ok but no lop | hairline crack by LOPTr coll tp LOPTx | 14-09-04 |
| Daewoo | GB14F7T1 | Sound disappears int | (IC) I501 a TDA8374A mounted on the VCR pcb. | 14-09-04 |
| Daewoo | GB14F7T1 | Won't sw on with tape stuck - st/by only | No volts at 6v reg IC1806 - P803 plug/skt has 8v in but no 8v o/p due to dry joint on/off sw | 14-09-04 |
| Daewoo | GB14F7T1 CP420 | St/by only | R804 47k start up res | 14-09-04 |
| Tatung | T21TF70 | Dead - st/by LED flashes 4 times | Means excess beam current - R909 o/c also could be R913/922 on crt base | 14-09-04 |