| Make | Model | Problem | Solution | Date |
| | | |
| Found: 12
|
| Harwood | HTF142SL | Dead - LOPTx squealing - blows LOPTr | C261 22nF leaky | 14-09-04 |
| Harwood | HTV4914 | Int snowy pic | Crack in print in tuner just after IF pin | 14-09-04 |
| Harwood | HTV9014R | Tripping | EM112 st/by tfmr o/c winding | 14-09-04 |
| Harwood | HTV9425RTN | Jumps when cold & int blank raster | R436 3R9 2w dry joints & hi res (near scart) | 14-09-04 |
| Harwood | HTV9425RTN | Off with a bang | C926 22µ 250v had exploded & C910 47µ 25v, C908 10µ 50v in pri psu | 14-09-04 |
| Harwood | HTV9425RTN | Sync poor when cold | C127 3µ3 50v in IF can | 14-09-04 |
| Hinari | HTV20 | dead with whistle | Q402 lop tr s/c 2SD1555; C909 47µ 25v. HT = 115v | 14-09-04 |
| Hinari | HTV20A (Onwa) | Pic fades out | Dry joints heater supply to crt (orange wire) plug on main pcb | 14-09-04 |
| Philips | 14HT3303 | Service code of the FM-Radio tuner. | In the partslist of the Radio-SP/LS-Vbatt panel of the Chassis Manual L9H.2E, the service code of the FM-Radio tuner item 1901 was not indicated.
The service code is 9352 632 70112 | 14-09-04 |
| Philips | 17HT5403 | To adj sound level of this "Hotel" TV | Press Set Up then "M" then scroll down options to vol - adj vol then press "M" | 14-09-04 |
|
|
| Philips | 20HT3303 | "welcome message" doesn't come up at start up. | When the set is switched off via the mains switch and is switched on again after more than 5 minutes, the "welcome message" doesn't come up at start up.
Put the set into the SDM mode. Select the option AS (Auto start-up).
Change the option content fr | 14-09-04 |
| Philips | 20HT3303 | Service code of the FM-Radio tuner. | In the partslist of the Radio-SP/LS-Vbatt panel of the Chassis Manual L9H.2E, the service code of the FM-Radio tuner item 1901 was not indicated.
The service code is 9352 632 70112 | 14-09-04 |