| Make | Model | Problem | Solution | Date |
| | | |
| Found: 8
|
| Proline | NV2100 | no pic, no sound. HT Ok but no 18V supply to line driver | resolder end pin of AV PCB connection to main PCB (left end of PCB when looking from rear of set, the 18V is fed thru this PCB) | 14-09-04 |
| Proline | NV2100 | NO SOUND OR PICTURE RASTER OK | DRY JOINT ON END PIN ON AV BOARD (LEFT END) | 14-09-04 |
| Proline | NV2700 | BLOWS FIELD CHIP AND 2R2 | CHECK 100mfd C306 ( ON LOPT SIDE OF HEAT SINK ) | 14-09-04 |
| Proline | NV3200 | Cuts out has to be switched off then back on again | D/J around Chopper TR heatsink | 14-09-04 |
| Proline | NV3200 | Field fback lines | C432 100µ 63v | 14-09-04 |
| Proline | NV3200 | frame foldover at the top | C432 next to frame IC | 14-09-04 |
| Proline | NV3200 | no sound when cold, then distorted, then Ok after 6-7 min | replace IC701 LA7955 situated on the AV PCB | 14-09-04 |
| Proline | NV3200 | WONT DISPLAY TIME | INITIAL TEXT PAGE HAS TO BE SET UP BEFORE TIME WILL WORK ( INITIALLY SET TO "000" BY MANUFACTURER ) | 14-09-04 |