| Make | Model | Problem | Solution | Date |
| | | |
| Found: 4
|
| ITT | CT600 80R | Line pulling or jitter intermittent. | Pk on video button - check VCR switch for grease on pins | 14-09-04 |
| ITT | CT600 CVC823 | Line pulling - two or three times a second. | VCR switch on PB unit. | 14-09-04 |
| Philips | 29PT6021 | SDM does not work by shorting service pins. | Measure pin 19 of SIMM connector 0226 on LSP, if it is 2V (normal is 1V)
then add a resistor of 1K8 between pin 19 of the SIMM connector and
ground. Make sure counting left from pin 1, do not use the pin no. printed
on service print! See attached ph | 14-09-04 |
| Sunkyong | SMT601 | Bright raster with little pic content sound ok | C420 4µ7 250v in video o/p decoupling stage | 14-09-04 |