free download

File name PCR2500 Manual ENG.pdf

INSTRUCTION MANUAL iR2500 COMMUNICATION RECEIVER This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FOREWORD Thank you for purchasing this Icom product. The IC-R2500 VHF/UHF FM RECEIVER is designed and built with Icom's superior technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. We want to take a couple of moments of your time to thank you for making your IC-R2500 your radio of choice, and hope you agree with Icom's philosophy of "technology first." Many hours of research and development went into the design of your IC-R2500. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the receiver. SAVE THIS INSTRUCTION MANUAL-- This instruction manual contains important operating instructions for the IC-R2500. EXPLICIT DEFINITIONS DEFINITION Personal injury, fire hazard or electric shock R WARNING! may occur. CAUTION NOTE Equipment damage may occur. Recommended for optimum use. No risk of personal injury, fire or electric shock. WORD D FEATURES Wide frequency coverage with all mode receive Both Remote controller operation and PC control application are available ANF and NR functions are available (Only when the optional DSP unit is installed.) IF shift function Icom, Icom Inc. and the logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. i PRECAUTION RWARNING! NEVER connect the receiver via the OPC254L to an AC outlet. This may pose a fire hazard or result in an electric shock. RWARNING! NEVER operate the receiver while driving a vehicle. Safe driving requires your full attention-- anything less may result in an accident. BE CAREFUL! The receiver will become hot when operating it continuously for long periods. AVOID setting the receiver in a place without adequate ventilation. Heat dissipation may be affected, and the receiver may be damaged. AVOID the use of chemical agents such as benzine or alcohol when cleaning, as they can damage the receiver's surfaces. NEVER connect the receiver to a power source of more than 14 V DC. This will damage the receiver. NEVER connect the receiver to a power source using reverse polarity. This will damage the receiver. NEVER cut the DC power cable between the DC plug and fuse holder. If an incorrect connection is made after cutting, the receiver may be damaged. For U.S.A. only CAUTION: Changes or modifications to this device, not expressly approved by Icom Inc., could void your authority to operate this device under FCC regulations. NEVER expose the receiver to rain, snow or any liquids. The receiver may be damaged. NEVER operate or touch the receiver with wet hands. This may result in an el