Sony MDS-SP55 free download

File name sony_MDS-SP55_service_manual.pdf

MDS-SP55 SERVICE MANUAL Ver 1.1 2001. 06 AEP Model UK Model E Model MDS-SP55 is the MD section in CMT-SP55MD, and MDS-SP55 is sold in the option as a minidisk deck of CMT-SP55TC. Model Name Using Similar Mechanism MD Mechanism Type Optical Pick-up Type MDS-JE330 MDM-5A KMS-260B/S1NP SPECIFICATIONS System Laser Laser output MiniDisc digital audio system Semiconductor laser (=780 nm) Emission duration: continuous Max. 44.6 µW* *This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. 44.1 kHz 20 Hz ­ 20 kHz General Dimensions (w/h/d) incl. projecting parts and controls Approx. 202 Ч 101 Ч 298 mm Mass Approx. 1.7 kg Supplied accessories System cable (1) Digital cable (1) Sampling frequency Frequency response Inputs DIGITAL OPTICAL CD IN: Optical DIGITAL OPTICAL AUX IN: Optical Output DIGITAL OPTICAL OUT: Optical Design and specifications are subject to change without notice. MINIDISC DECK 9-929-537-12 2001F0200-1 © 2001.6 Sony Corporation Home Audio Company Shinagawa Tec Service Manual Production Group 1 SELF-DIAGNOSIS FUNCTION The self-diagnosis function consists of error codes for customers which are displayed automatically when errors occur, and error codes which show the error history in the test mode during servicing. For details on how to view error codes for the customer, refer to the following box in the instruction manual. For details on how to check error codes during servicing, refer to the following "Procedure for using the SelfDiagnosis Function (Error History Display Mode)". C13/REC Error Recording could not be performed properly. cMove the system to a stable place, and start recording over from the beginning. The MD is dirty or scratched, or the MD does not meet the standards. cReplace the MD and start recording over from the beginning. C13/Read Error The MD deck cannot read the disc information properly. cRemove the MD once, then insert it again. C14/Toc Error The MD deck cannot read the disc information properly. cReplace the MD. cErase all the recorded contents of the MD using the All Erase function (See page 32). C41/Cannot Copy The sound source is a copy of a commercially available music software, or you tried to record a CD-R (Recordable CD). cThe Serial Copy Management System prevents making a digital copy. You cannot record a CD-R (see page 43). C71/Check OPT-IN This appears momentarily because of the signal of the digital broadcast during recording. cThere is no affect on the recorded contents. No component is connected to the DIGITAL OPTICAL IN jack, or a digital component is not connected properly. cConnect a digital component to the DIGITAL OPTICAL IN jack properly using a digital connecting cable (an optical cable) (not supplied (See page 39). The connected digital component is not turned on. cSee the operating instructions supplied with the connected component and confirm whether the component is turned on. The digital connecting