. Various 2200 Manual Section 3 free download

File name 2200 Manual Section 3.pdf

OPTIMOD-FM 2200 OPERATION 3-1 Section 3 Operation page contents 3-3 2200 Controls and Meters 3-5 Introduction to Processing 3-7 About the Processing Structures 3-7 Factory Programming Presets 3-9 Customizing the 2200's Two-Band Sound 3-11 Two-Band Processing Control Details 3-19 Customizing The Protection Limiter Structure Sound 3-19 Protection/Limiting Control Details 3-21 2200 Screen Displays Caution The installation and servicing instructions in this manual are for use by qualified personnel only. To avoid electric shock do not perform any servicing other than that contained in the Operating Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel. 3-2 OPERATION OPTIMOD-FM 2200 page OPTIMOD-FM 2200 OPERATION 3-3 2200 Controls and Meters 2200 Front Panel Screen Display labels the four soft key buttons and provides control setting informa- tion. Screen Saver feature: The screen has a built-in screen saver that turns off the backlight after approximately one hour. The screen turns back on when any front panel control is touched. Note that buttons don't perform their normal function when the screen is blank. Similarly, the control knob's first turn is not read, until it stops for a second or so. Contrast Button adjusts the optimum viewing angle of the screen display. Press this button to cycle through four contrast settings for the screen display. Four Soft Key Buttons provide access to all 2200 functions and controls. The functions of the buttons change with each screen according to the labels at the bottom of each screen. Push a button: To select options (always identified on the screen by all-capital-letter words surrounded by left and right vertical bars), press the button directly below the option. To change a parameter setting (always identified by lower-case letters or numerals), hold down the button directly below the parameter setting, turn the control knob to scroll through choices, and release the button to set the parameter. Control Knob is used for changing data in one of three methods. To scroll through submenu choices: Presets (on Recall Preset screen), FULL CONTROL param