Agilent HP 83620B 252C 22B 252C 23B 252C 24B 252C 30B 252C 40B 252C 50B User 2001 free download

File name HP 83620B_252C 22B_252C 23B_252C 24B_252C 30B_252C 40B_252C 50B User 2001.pdf

Agilent Technologies 8360 B-Series Swept Signal Generator (Including Options 001, 002, 004, 006, and 008) User's Guide Serial Number Prefixes: This manual applies directly to any swept signal generator with the model and serial number prefix combination shown below. You may have to modfiy this manual so that it applies directly to your instrument version. Refer to the "Instrument History" chapter. Agilent Technologies 83620B/22B/23B/24B/30B 3844A and Below Agilent Technologies 83640B/50B 3844A and Below Part No. 08360-90127 Printed in USA May 2001 Supersedes March 2001 . The information contained in this document is subject to change without notice. Notice Agilent Technologies makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and tness for a particular purpose. Agilent Technologies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Restricted Rights Use, duplication, or disclosure by the U.S. Government is subject Legend to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights of Technical Data and Computer Software clause at DFARS 252.227-7013 for DOD agencies, and subparagraphs (c) (1) and (c) (2) of the Commercial Computer Software Restricted Rights clause at FAR 52.227-19 for other agencies. c Copyright Agilent Technologies 1996, 1997, 1999, 2000, 2001 All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. 1400 Fountaingrove Parkway, Santa Rosa, CA 95403-1799, USA Agilent Technologies certi es that this product met its published speci cations at the time of shipment from the factory. Agilent Certification Technologies further certi es that its calibration measurements are traceable to the United States National Institute of Standards and Technology, to the extent allowed by the Institute's calibration facility, and to the calibration facilities of other International Stan