|85519A Calibration Kit Data Sheet 85519-90001 c20140603 .pdf||Your calibration kit has been designed to withstand a moderate amount of physical stress. However, to retain its
high precision performance you should treat it with care and prevent any mechanical shock.
It can be damaged if excessive force is applied to the connectors. Such a damage is considered as an abuse
of the cal kit and will void the warranty when verified by our service professionals. When the kit is not
in use, mount protective caps on the connectors such as the ones which came with the kit.
Store the kit in a shock-resistant environment.
Type N connectors may be connected finger tight. If a torque wrench is used, 12 lb-inch (136 N-cm)
is recommended. For information on service and recertification go to
http://www.keysight.com/find/serviceprices Data Sheet
Temperature loading operating temperature range +18|