Agilent Product-Guide-WinXP-insertproductnamehere E4982A Guide for Windows XP End of Support E4982A LCR Met free download

File name Product-Guide-WinXP-insertproductnamehere_E4982A Guide for Windows XP End of Support_ E4982A LCR Met

Guide for Windows XP End of Support: E4982A Introduction As of April 8, 2014 Microsoft has ceased supporting the Windows XP operating system. No further security patches will be delivered by Microsoft beyond this date. This document will help you answer the following questions: How do I know if my instrument runs on Windows XP? What are the risks of using my instrument connected to a PC or the LAN? How do I minimize the risks? What do I do if I find an infection I can't remove? How do I know if my instrument runs on Windows XP? See Serial-number prefix. MY521 to MY522 and SG521 to SG522 on Rear panel of the instrument are for Windows XP or Click Windows start -> Right Click My Computer -> Click Properties See System Properties 1 What are the risks of using my instrument connected to a PC or the LAN? This instrument internally consists of the measurement hardware and it also has a PC built inside which is running Windows XP. Therefore the same rules and precautionary measures that apply to laptop and desktop PCs apply to this instrument as well. Almost all threats are spread via the internet or via USB thumb drives. If the instrument is connected to an infected thumb drive, PC or to a LAN that is not adequately protected, it may become infected. The instrument can then pass the infection on to other PC's, and/or its speed of operation may be significantly slowed. How do I minimize the risks? Disconnect the instrument from the LAN. Disconnecting the instrument from the LAN is the simplest procedure to reduce the risk or to comply with the rules setup by your IT department. Do not disable the LAN ports, as that may affect the licensing mechanism. If you disable the LAN ports in Windows you may lose all licenses. Upgrade to Windows 7. Our products will continue to function to published specification on Windows XP. Customers needing to make their product Windows 7 compatible will find there is an available option to purchase a Windows XP-to-Windows 7 migration kit through their local Agilent sales office. E4982AU-040 will be available to order in May, 2015. (Tentative Schedule) Keep your antivirus program and definitions up to date. If your instrument is running an antivirus program for XP, your vendor may continue to provide virus definitions for new threats that emerge. Use sanitized USB or GPIB connectivity for remote programming using a PC. If you are presently sending commands to the instrument from a remote PC to automate your tests and you are using the LAN port to connect to the instrument please consider the following approach (see diagram). Most of our instrument support 3 different communication interfaces to send commands: USB, GPIB and LAN. The instrument uses a SCPI interface for communicating