Agilent MOI for DisplayPort PHY CTS 1.2b Sink Tests -PHY-CTS-1-2b-J-BERT-Sink-MOI-d3-v0-9 [56] free download

File name MOI for DisplayPort PHY CTS 1.2b Sink Tests Agilent-PHY-CTS-1-2b-J-BERT-Sink-MOI-d3-v0-9 [56].pdf

Agilent Technologies, Inc. DisplayPortTM Standard Draft 3 February 25 , 2013 Agilent MOI for DisplayPort PHY CTS 1.2b Sink Tests Using J-BERT N4903B and Calibration Using DSA90000A/X/Q Series Oscilloscopes This document is provided "AS IS" and without any warranty of any kind, including, without limitation, any express or implied warranty of non-infringement, merchantability or fitness for a particular purpose. In no event shall VESATM or any member of VESA be liable for any direct, indirect, special, exemplary, punitive, or consequential damages, including, without limitation, lost profits, even if advised of the possibility of such damages. This material is provided for reference only. VESA does not endorse any vendor's equipment including equipment outlined in this document. DisplayPort Test Implementation Group 1 Agilent J-BERT N4903B & 90000A/X/Q Series Sink Draft2 Agilent Technologies, Inc. 1 MODIFICATION RECORD ... 4 2 INTRODUCTION ... 5 3 REFERENCES ... 6 4 ACKNOWLEDGEMENTS ... 6 5 TABLE OF FIGURES ... 7 SINK JITTER TOLERANCE TEST (4.1) ... 9 6 PRE-TEST PROCEDURES: ... 9 7 TEST OBJECTIVE ... 9 8 TEST CONDITIONS ... 9 9 SINK TEST CALIBRATION PROCEDURE ... 10 9.1 ISI VERIFICATION ... 11 9.2 RJ CALIBRATION ... 15 9.3 SJ CALIBRATION ... 17 9.3.1 SJFIXED Calibration...