Agilent E6650A EXFUpdateInstructions EXF Instrument Software Update Instructions c20141017 [11] free download

File name E6650A_EXFUpdateInstructions EXF Instrument Software Update Instructions c20141017 [11].pdf

EXF Wireless Test Set for Femtocell Software Update Instructions Introduction The purpose of this document is to outline the instrument software update procedure for the E6650A EXF Wireless Test Set for Femtocell. This procedure will update the instrument software, from the revision that is currently installed, to the latest revision available. The advantages of updating the instrument software with the current revision include: 1. Keeps the EXF Wireless Test Set for Femtocell current and up to date. 2. Updates the measurement applications where appropriate. 3. Updates the PC board software where appropriate. An update to the instrument software revision does not require a new license key for the measurement application(s), so long as the application(s) were licensed prior to the update. To determine what revision of instrument software is currently installed, the XSA Application must be running; see figure 1. Figure 1 1 Connect a mouse to one of the front panel USB ports and right mouse click inside the XSA Application Window. Go to Utility, System, Show, System on the instrument and look for the "Instrument S/W Revision" number (for example: "F.14.54"), see figure 2. Figure 2 If the installed revision is the same as the latest revision on the web, there is no need to update the EXF Software. Note: This will only update the instrument software that currently resides on the C: drive of the instrument. It will not update the version that exists on the recovery partition. Because of this, if the recovery process, as described in the EXF service guide, is performed, the instrument will revert back to the instrument software revision that was originally shipped from the factory. 2 Requirements To use this update procedure, the following requirements must be met: A properly functioning instrument. A USB keyboard and mouse. The ability to log in to the instrument as the administrator. The ability to transfer a large file (~1.5G Byte) to the instrument being updated. File Download 1. Go to http://www.keysight.com/find/EXF_Software 2. Select and download the executable file "Instrument Software (Version F.xx.xx)" in the "Documents & Downloads" section of the webpage. If you do not have the ability to download files directly to the C: drive of the instrument being updated, store the file on a large capacity USB storage device for transfer to the instrument. (The file size is ~1.5 GByte.) USB: If you downloaded the instrument software update file to a PC, then transferred to a USB storage device, plug that USB device into one of the USB ports on the instrument. Access the file using Windows Explorer, and proceed to Step 1. LAN: If you downloaded the instrument software update file directly via LAN to the instrument, for example, to C:temp, access the file from t