DENON Service Bulletin OST-C1324 free download

File name Service Bulletin OST-C1324.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-C1324 Date: May 23, 2008 _____________________________________________________________ Model: RC-7000CI Subject: Insufficient operating range of RC-7000CI in home environment. Symptom: The distance that the electrical signal reaches shortens by the environment (electrical signal situation and shield, etc.) where the RC7000C is used. Or, "RF OUT OF RANGE" might be displayed in the LCD display of RC- 7000CI, and operation becomes slow. Advice: Please answer any inquiry concerning "Attainment distance" and "Operation specification" from the customer as follows: About Distance that the wireless signals reaches. 1) The distance that can reach the wireless signal described to the manual is a numerical value when there is neither "Shield" nor "Obstruction". 2) The distance that the wireless signal reaches becomes about 1/3 compared with WiFi for PC. 3) It might take time in the short distance (About 5-10m) by the time the display appears to RC-7000CI. 4) The display begins to display it correctly after correctly receiving all data. Therefore, time might hang in the update when the error occurs during the communication. 5) In the distance of about 5-10m, when the communication environment worsens, "RF OUT OF RANGE" is displayed. 6) At this time, the delay is generated by the obstruction in the communication data, and the display cannot be updated. Please operate it after it waits for a while. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Attention installer. 1) Please do the pairing setting in the room where you use RC-7000CI to set it to a correct channel. 2) Do not execute the pairing setting when the equipment that generates jamming waves such as WiFi, Bluetooth, and microwave ovens operate. 3) When the distance that the wireless reaches shortens after setting the pairing, the pairing setting is executed again. 4) RC-7001RCI should be set up in the place in which a wireless signal is not generated. 5) RC-70001RCI should be separated from the AV amplifier as much as possible within the range of cable (1m). 6) RC-70001RCI shoul