|disassembly__reassembly.pdf||Disassembly and Reassembly
3. Disassembly and Reassembly
3.1 General Precautions on Disassembly
When you disassemble and reassemble compo- Releasing Plastic Latches
nents, you must use extreme caution. The close
proximity of cables to moving parts makes proper
routing a must. Many of the parts are held in place with plastic
If components are removed, any cables disturbed latches. The latches break easily; release them
by the procedure must be restored as close as carefully.
possible to their original positions. Before remov- To remove such parts, press the hook end of the
ing any component from the machine, note the latch away from the part to which it is latched.
cable routing that will be affected.
Whenever servicing the machine, you
must perform as follows:
1. Check to verify that documents are not stored
2. Be sure to remove the print cartridge before|