Information about the files in archive: |
Decompress result: | OK |
Extracted files: | 3 |
File name | | Text |
Pages from Phaser_3100MFPServiceManual1.pdf | | Phaser 3100MFP
SERVICE MANUAL
708P89057
04/08
Phaser 3100MFP Service Documentation 708P89057 04/08 Prepared by: Xerox Europe, Global Knowledge & Language Services, Enterprise Centre, P.O. Box 17, Bessemer Road, Welwyn Garden City, Hertfordshire, AL7 1BU, England. © Copyright 2008 by Xerox Ltd. Xerox, and all identifying numbers used in connection with the Xerox products mentioned in this publication are registered trademarks of Xerox. Other company trademarks are also acknowledged. NOTICE While every care has been taken in the preparation of this manual, no liability will be accepted by Xerox Europe arising out of any inaccuracies or omissions. All service documentation is supplied to Xerox external customers for informational purposes only. Xerox service documentation is intended for use by certified, product trained service personnel only. Xerox does not warrant or represent that it will notify or provide to such customer any future change to this documentation. Customer performed |
Pages from Phaser_3100MFPServiceManual2.pdf | | Repairs and Adjustments
This page is intentionally blank
4-92
04/08
Phaser 3100 MFP
Parts List
5 Parts List
PL 1 Controls and Cables ... 5-2 PL 2 Covers ... 5-4 PL 3 Paper Exit and Rear Cover ... 5-6 PL 4 Output Tray Assembly ... 5-8 PL 5 Scanner ... 5-10 PL 6 CIS Support ... 5-12 PL 7 Automatic Document Feeder (3100MFP/X only) (1 of 3) ... |
Pages from Phaser_3100MFPServiceManual3.pdf | | General Procedures and Information
GP 16 Packing and Transporting the Machine
If you need to transport the machine, always use the original package. If the machine is not prop-
erly packed, the warranty may be cancelled. Also check that the machine new location meets the
installation requirements, GP 9.
1. Set the machine On/Off switch to Off (position 0).
2. Disconnect all the cables connected to the machine.
3. Remove the document feeder and gently push the paper tray inwards to avoid obstructing the
machine packaging.
4. Pack the machine in its original plastic wrapping and put it in its original packing box together
with the other components (power cord, etc.).
5. Pack all documentation (manuals and printed documents) into the packing box and seal it
with adhesive tape.
Removable ADF Power cable
document tray
(3100MFP/X only)
|