Samsung 03_disassembly_and_reassemble_E free download

File name 03_disassembly_and_reassemble_E.pdf

3. Disassembly and Assembly 3. Disassembly and Assembly This section describes the disassembly and reassembly sequences for this monitor. As this monitor has parts that are sensitive to static electricity, be careful when handling them. 3-1. Disassembly 1. Turn the monitor off before beginning the disassembly process. 2. When disassembling the monitor, do not use any metal tools except for the provided jig. 3. Disassemble the monitor carefully as directed in the following procedures. Description Photo 1. Separate the front cover from the top first, pulling in the direction of the arrow. Internal locking tabs on the front and back covers. * These can be broken off easily during disassembly causing reassembly impossible. 3-1 3. Disassembly and Assembly Description Photo 2. Do not disassemble all and put the monitor down on the table as shown in the picture. 3-2 3. Disassembly and Assembly Description Photo 3. Remove the Rear cover from the upper side. 4. Disconnect the LVDS cable and function cable from the connector. 3-3 3. Disassembly and Assembly Description Photo 5. Remove the 12 screws. Screw 6003-001001 2 EA 6001-001470 5 EA 6001-001114 5 EA 6. Separate the panel from the BRACKET-PANEL. 3-4 3. Disassembly and Assembly Description Photo 7. Remove the 4 screws that connects the HINGE to the BRACKET-PANEL. Screw 6001-001114 4 EA 3-5 3. Disassembly and Assembly Description Photo 8. Separate the BRACKET-PANEL from the Stand. 9. Remove the 7 screws on the bottom side of the stand. Screw 6003-001086 7 EA 3-6 3. Disassembly and Assembly Description Photo 10. Separate the STAND TOP carefully. Be sure not to bend the TOP when you take the cover off. 11. Remove the 4