File name HP 8719D_252C 20D_252C 22D User.pdf
Hewlett-Packard to Agilent Technologies Transition
This documentation supports a product that previously shipped under the Hewlett-
Packard company brand name. The brand name has now been changed to Agilent
Technologies. The two products are functionally identical, only our name has changed. The
document still includes references to Hewlett-Packard products, some of which have been
transitioned to Agilent Technologies.
Printed in USA March 2000
HP 8719D/2OD/22D Network Analyzer
HP Part No. 08720-90288 Supersedes: October 1998
Printed in USA February 1999
The information contained in this document is subject to change without notice.
Hewlett-Packard makes no warranty of any kind with regard to this material, including
but not limited to, the implied warranties of merchantability and fitness for a particular
purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this material.
@ Copyright 1996-1999 Hewlett-Packard Company
Hewlett-Packard Company certifies that this product met its published specifications at the
time of shipment from the factory. Hewlett-Packard further certifies that its calibration
measurements are traceable to the United States National Institute of Standards and
Technology, to the extent allowed by the Institute's calibration facility, and to the calibration
facilities of other International Standards Organization members.
Note The actual warranty on your instrument depends on the date it was ordered
as well as whether or not any warranty options were purchased at that time.
lb determine the exact warranty on your instrument, contact the nearest
Hewlett-Packard sales or service office with the model and serial number of
your instrument. See the table titled "Hewlett-Packard Sales and Service
Offices," later in this section, for a list of sales and service offices.
This Hewlett-Packard instrument product is warranted against defects in material and
workmanship for the warranty period. During the warranty period, Hewlett-Packard Company
will, at its option, either repair or replace products which prove to be defective.
If the warranty covers repair or service to be performed at Buyer's facility, then the service or
repair will be performed at the Buyer's facility at no charge within HP service travel areas.
Outside HP service travel areas, warranty service will be performed at Buyer's facility only
upon HP's prior agreement, and Buyer shaIl pay HP's round-trip travel expenses. In all other
areas, products must be returned to a service facility designated by HP
If the product is to be returned to Hewlett-Packard for service or repair, it must be returned
to a service facility designated by Hewlett-Packard.