Keithley Instruments, Inc. Dual 1x30 FET Multiplexer Specifications
28775 Aurora Road
Cleveland, Ohio 44139 60 differential channels, Automatic CJC w/3724-ST
DUAL 1X30 MULTIPLEXER CARD
MULTIPLEXER CONFIGURATION: Two independent 1x 30 2-pole Multiplexers. Banks can be connected together
via relay creating a single 1 x 60 Multiplexer. Banks can be isolated from the backplane by relays. Card can be
configured for 2 and 4 wire.
CONTACT CONFIGURATION: 2 pole form A.
CONNECTOR TYPE: Two 78 pin male D-shells.
MODEL 3724-ST SCREW TERMINAL OPTION:
#22AWG typical wire size with .062 inch O.D 124 conductors maximum. 16 AWG maximum wire size with .092
inch O.D. 36 conductor per card maximum.
MAXIMUM SIGNAL LEVEL: 200V DC or 141V RMS between any terminal, .1A switched (.1A carry), 800mW.
COMMON MODE VOLTAGE: 300V DC or RMS between any terminal and chassis.
VOLT-HERTZ LIMIT : 107