Keithley pa817a(Model4200SCS) free download

File name pa817a(Model4200SCS).pdf

Model 4200-SCS Customer Repacking Keithley Instruments, Inc. 28775 Aurora Road and Shipping Instructions Cleveland, Ohio 44139 (440) 248-0400 Fax: (440) 248-6168 www.keithley.com Purpose These instructions define the steps necessary to pack and ship a Keithley Model 4200-SCS system using the original factory shipping materials. (If the unit is in warranty, factory packing materials can be obtained from Keithley at 1-888-534-8453 or optionally minimal non-Keithley materials can be used as described on page 3 of this packing list.) The unit must be packaged in a manner to ensure against damage or contamination during shipment, storage, and unpacking. If these instruc- tions are not followed, the customer will be responsible for any shipping damage to the unit. Scope These steps apply to all Keithley Model 4200-SCS systems to be packed and shipped. Two different variations of the system are available. One of the systems has a flat panel display built into the main unit. The second variation uses a standard external video monitor. The second variation requires additional instructions and will be shown in bold italics. WARNING The Keithley Model 4200-SCS system may be configured so that its weight is greater than a one person lift. Lift the system carefully to avoid injury and to pre- vent the system from falling. CAUTION The Keithley Model 4200-SCS system unit must be shipped on a pallet. Packing using Keithley materials The following steps are designed for one person to perform the actions for the packing and shipping of a Keithley Model 4200-SCS system. 1. Verify that the interconnect plug is disconnected and that the CD-ROM and floppy drives are empty. 2. Use one 9232-412B Shipping Pallet (40"