|24682A(DAS-4300Addendum).pdf||DAS-4300 Series Addendum
This document describes changes made to the DAS-4300 Series boards in
order to achieve compliance with the European EMC directive 89/336
EEC (CE Mark certification). In addition, this addendum provides
corrections to the DAS-4300 Series documentation.
Pins 5 and 12 of U514 (74ABT125) have been lifted in order to disable
the clock output function. If you connect multiple DAS-4300 Series
boards and want to use one internal clock for all the boards, you need to
replace the pins.
Spring gaskets have been installed over the BNC connectors. When a
cable is attached, these gaskets are compressed between the cable
connector and the bracket.
The DAS-4300 Series Function Call Driver User's G|