| Make | Model | Problem | Solution | Date |
| | | |
| Found: 13
|
| Goodmans | C530 | Int pic - reverts to line collapse | LH01 int o/c pt no ACTI19433130A | 14-09-04 |
| Goodmans | C530 | St/by only | Glue on ribbon cable at control pcb conductive | 14-09-04 |
| Grundig | CUC5301 | Child lock removal | Hold in vol + vol - prog - prog + when inputting the pin no | 14-09-04 |
| Grundig | CUC5301 | Dead - fuse blown. | Chopper tran T644 s/c , D681 ( BYV38 ) leaky. | 14-09-04 |
| Grundig | CUC5301 | DEAD FUSE BLOWN CHOPPER SC | D681 SC | 14-09-04 |
| Grundig | CUC5301 | Field Collapse | D401 12v zener s/c and hi ht due to 2 x 47µ caps | 14-09-04 |
| Grundig | CUC5301 | Int pic - sound ok | dry joints T568 tr heatsink - mech stressed | 14-09-04 |
| Grundig | CUC5301 | no r/c | 4 pin rec u/s - replace with 3 pin version | 14-09-04 |
| Grundig | CUC5301 | OSD dim & outline only - ok when no sigs present | IC2541 TDA3566 col dec chip u/s | 14-09-04 |
| Grundig | CUC5301 | R/C inop - no response from IR Rx | Replace IR unit TFMS4300 4 leg type, with TFMS5360 3 leg type not all 3 leg type will do | 14-09-04 |
|
|
| Grundig | CUC5303 | No front or R/C controls aft couple of hours | IR Rx | 14-09-04 |
| Grundig | CUC5303 | PS. Transistor blown. Changed chopper tr, and TDA4605, But they were blown again. Occasionally the set before blowing the smps may run for a while. | Check/Replace R632 270K Resistor. | 14-09-04 |
| Grundig | CUC5305 | No i/p via scart | IC2350 TDA5931-5 on IF pcb | 14-09-04 |