| Make | Model | Problem | Solution | Date |
| | | |
| Found: 20
|
| Sanyo | A5 CBP2180 | int. dead | resolder Q432 | 14-09-04 |
| Sanyo | A5 CBP2180 | int. frame collapse | replace L451 33uH (int. o/c, delivers 24V supply from LOPTx pin 6) | 14-09-04 |
| Sanyo | A5 CBP2180A | Field collapse | L451 connection faulty (hidden under a blob of glue) | 14-09-04 |
| Sanyo | CBP2180 | Field bounce | L401 in field o/p supply intermittent | 14-09-04 |
| Sanyo | CBP2180 | Int lum | Dry joint lum del line IO21 near loptx | 14-09-04 |
| Sanyo | CBP2180 | INTERMITTANT DEAD | DRY JOINTS ON Q432 | 14-09-04 |
| Sanyo | CBP2180 | No signals | No volts at TU pin of tuner - dry joints link J159 at front right of main pcb | 14-09-04 |
| Sanyo | CBP2180 | No tuning or tuning volts | R714 10k on front control pcb o/c | 14-09-04 |
| Sanyo | CBP2180 | Pic displaced with vert band of col or no sound - osd ok | VR411 hor shift pot | 14-09-04 |
| Sanyo | CBP2180 | Sound buzz, non lin field & lines | crack in print by field chip heatsink so C451 had no chassis return | 14-09-04 |
|
|
| Sanyo | CBP2180 | St/by only - if st/by button on hset pressed, led would go out only to reappear a few secs later | No 12v supply - IC552 78M12 reg o/c | 14-09-04 |
| Sanyo | CBP2180 A5 | Field collapse | No supply to IC451 FOP chip as L451 33µH dry joints or o/c | 14-09-04 |
| Sanyo | CBP2180 A5-A21 | Pic shift to left, hanover bars & no sound | Check VR411 hor shift control for o/c | 14-09-04 |
| Sanyo | CBP2180-00 | Int pic | Dry joints C554 22µ 250v | 14-09-04 |
| Sanyo | CBP2180A | Field collapse | L451 o/c | 14-09-04 |
| Sanyo | CBP2180A | No pic & Txt too far to right - sound ok | Hor pos preset (VR404?) - upright, rear left of pcb | 14-09-04 |
| Sanyo | CBP2180A | St/by only | Dry joint R512 | 14-09-04 |
| Sanyo | CBP2180A A5 | Field - various effects often int | Check L451 33mH for o/c | 14-09-04 |
| Sanyo | CBP2180A A5 | Field non lin, crooked verts & int col | 12v supply risen to 14v as IC552 12v reg had dry joint to chassis | 14-09-04 |
| Sanyo | CBP2180A A5 | Pic shift to left & Q422 on DPC pcb overheats | Replace line shift pot VR411 50k - cleaning will usually result in call back | 14-09-04 |