|03458-90032 Opt001 install.pdf||Agilent 3458A Option 001 Installation Note
Thank you for purchasing the Agilent 3458A Option 001 Extended Memory Upgrade kit (P/N 03458-87902)!
This document contains the procedure for installing the extended memory option 001 to a standard 3458A
Serial Number US2803152 and greater. For units with serial number US2803152 and below that have NOT
updated the 3458A WITH KIT P/N 03458-88047, the correct P/N is 03458-87901
For the most up-to-date information on the Agilent 3458A, go to www.agilent.com/find/3458a.
Use clean-handling and anti-static techniques when handling and installing the IC.
Removing the Top Cover
1. Remove both rear handle brackets with a #2 Pozidrive.
2. Remove the rear bezel by loosening the four #15 TORX screws.
3. With the back of the instrument facing you, remove the #10 TORX screw securing the top
cover to the right side. NOTE: This screw provides ground continuity to the cover.