Subject | Text |
| STEPS:
1. Make sure to connect the IC and Diode correctly coz it has a pin guides.
2. Check the DC |
Electrolux-Washing-Machines EWF 1234 doesn't start, Hints t | Hello! I am stuck, please help me finding a solution.
Our washing machine one day just didn't star |
|
| [quote:fdc1650aa0="jon_ny"]does not have a safety number TOX135, has a bar code:00195111023366[/quot |
Is a T5A H250V fuse the same as a F5L 250V? | The ceramic type will not make any difference to the circuit operation and is purely a safety issue |
| Similar fault 11AK19pro bush HS6671SIL
Dry joint on R606 in E/W circuit caused burn of R629 2.7ohm |
| 1. That depends on what kind of high power amplifier you have built and what its purpose is (i. e. a |
Re: Matsui TVR2095TT - resistor value | [quote:54033cd89e="Dickgodden"]Can anybody help me with this please: Resistor R447 connected to pin |
sony kv32xbr96s affraid to get zapped!! | after fixing almost all troubles on my sony with your gratefull help guys
the final step is to adju |
Tech Bulletin | Product:
Product Safety Precautions:
Product Safety Precautions are described in the Toshiba servi |
Zener Diode Power | First, you try to find the part number from the manuyfacturer, in data books, on the 'net, or wherev |
heavy t.v. | Generally you would normally carry a television with the tube facing you and if climbing the stairs |
| If you do attempt a tube replacment always wear safety glasses |
| Somethings got to be wrong.... the heat sink, radiators as you call it should not run that hot you b |
| [quote:2f0fd173c5="vtech"]Remember with thermal cutoffs, the degree is the most critical factor but |
| By "bulging" capacitor, it is meant that capacitor has already failed or (failing) due to |
Varying degrees of electronic knowledge | I've Noticed That Users of the site have varying degrees of electronic knowledge it would be helpful |
NEEDED Xerox DocuColor2240 tech | Our color copier hates us.
we are in the tampa/safety harbor area.
any reccomendations for a r |
|
| Does the relay energize when "Start" is pressed?
Be careful - high voltage & curren |
| How is the set stuck in standby? Are there any sounds coming from the back of the TV when you switch |
| Hi Mariuss
Interesting that the zener protecting the battery status signal was the one that died. |
| The EI-35 number is listed in the parts which came up on a search to Sumida Of course Tenpao is what |
hitachi C28WD2TN2 | My television is 5 years old, but has been turning itself on and off at random for a couple of years |
How to choose the auto dry cabinet? | The purchase advice:
(1) Auto dry cabinet is a special product and has particular demand for re |
| Look at the fine print on the circuit board near the fuse holder. The safety regulations require tha |
ventura | Hi I was wondering if anyone can help me. I have a vetura dvd system and sometimes when i play copie |
| n15 value is 600mA. as it is a safety critical device it should only be replaced with the same devic |
| Never heard of anyone doing this before. Just stick the module in. No programming should be requir |
Panasonic VCR Message F04 | First of all with the cover removed the start/end sensors may be picking up artificial light upsetti |
| after 2...10 sec -----> put in safety
http://www.boostupload.com/img.php?i=430_140vt001.jpg |
| Have you tried Zanussi? http://www.zanussi.com/
Of course, they do include the following on the |