| Subject | Text |
| TV SET REPAIRS | :D If you are in any doubt as to your ability to undertake any tv repair-dont!!!
There are certain |
| Re: LG 17" monitor Studioworks 77i | [quote:8d8254385d="leo168"]My LG Studioworks 77i monitor is shutting down after a few hours.
It's |
|
|
| Re: sony str/av920 | [quote="helidock"][quote="Stompintomconnor"]I have owned this amp since new and |
| Matsui TVR2095TT - resistor value | Can anybody help me with this please: Resistor R447 connected to pin 1 of LOPT is discoloured and ca |
| It could be power related, there are filter capacitors after the rectifier diodes and usually small |
| Based on your description, sounds like a thermal fuse? More than likely it is not where the problem |
| Don't know the brand or type of the TV, but if it has a electronic convergence adjustment, you might |
| Fixed | For the record, to help anyone out in the future:
I replaced the 3 main (and largest) filter capa |
| There is no difference between the wires (18WAG) denotes the same
Why not do it correctly & c |
| What do you mean by the power transformer?
The primary ground needs to be isolated from the secon |
| Could not say for sure if the primary reading is correct or not without knowing or comparing it wit |
| BUMP-
Help please if you have the time.
The picture looks like if it could roll it would. But |
| resolder all joints in the line output stage, check R629 (27ohms, 1/2w 90 degree tube)(2.7ohms, 1/2w |
| Any experience with BAPCO IEC601L Universal? | Using a BAPCO IEC601L Universal Safety Tester for Leakage Current tests. Recently back from Calibrat |
| Re: schematic formenti f19 -in Goodmans W322NS | [quote:0adba2f86c="paul"]Have a manual but no circuit diagram . Set is a Goodmans W322NS and it is a |
| TI mcu | TI's MCU is a customized product for customers who have special needs for safety. They are generally |
| It sounds like a bad electrolytic capacitor in the vertical circuit. You would have to know about t |
|
|
| Unit is dead and there are no blinks---Problem in the standby power section. Might check fuse, R607, |
| [quote="vtech]
There is also a reference of EI-35 for the transformer in the parts list which |
| Philips Magnavox TV Service Manual 7586 multiple models | [size=18:e150f5ca70][b:e150f5ca70]Philips Magnavox Service Manual (7586)[/b:e150f5ca70][/size:e150f5 |
| does not have a safety number TOX135, has a bar code:00195111023366 |
| Field service tip | Product:
Product Safety Precautions:
Product Safety Precautions are described in the Toshiba servi |
| Treadmill bollinger | Sorry, for my English.
My tradmill has stopped working, it is always giving the error 04, when |
| Pioneer is continuing to offer a free, in-home/office power supply replacement for certain of its se |
| Most Omron relays are industry standard types and compatible relays from other manufacturers (Taiko, |
| Got the same problem too after only 2 years of service. :evil:
looks like the power supply board |
| after 2...10 sec -----> put in safety
http://www.boostupload.com/files/851_tension1.jpg |
| In this case, the resistance is 929 ohm.
Most digital multimeters have a so-called 3 1/2 digit disp |
| Re: Varying degree of electronic knowledge | [quote:94cba6414f="Donny"]Although you do have a point mainly for safety reasons...[/quote:94cba6414 |
| LG 17" monitor Studioworks 77i | My LG Studioworks 77i monitor is shutting down after a few hours.
It's mainly when the room temper |